SARAMONIC SR-AX104 2 Channel XLR Audio Adapter with Preamp. and RCA Monitoring

SARAMONIC SR-AX104 2 Channel XLR Audio Adapter with Preamp. and RCA Monitoring

• Inputs: One 1/8″ (3.5 mm) Auxiliary Mini-Jack Input
• Two balanced XLR inputs
• Monitor input jacks for connecting the AV cable to the camera
• Output:One stereo 1/8″ (3.5 mm) Mini-Jack output
• Control Knobs:Left and Right Control Knobs adjust the signal of each channel to the optimum recording levels
• Volume Control knob adjusts the headphone volume level
• Mono /Stereo Switch:Select mono or stereo output mode
• LINE / MIC/ PH Switches:Select LINE or MIC or Phantom levels
• 12V/48V Switch:Optional 12 or 48 volt phantom power for condenser microphones that require phantom power to operate.
• Level Meter:Indicates the sound level in dB for each channel
• LED indicators:The LED signal indicators flash red for overload
• GND1/GND2 Ground Switch:Eliminate ground hum and noise for getting the best sound
• Gain Switch:Selects LO for unity gain or HI for +20dB boost
• Set the Gain Switch to HI for most microphones
• Set the Gain Switch to LO for very sensitive condenser microphones or recording very loud sounds
• MONITOR :Headphone jack to monitor the audio from microphones or camera
• AGC DSBL:Camera Auto Gain Control will increase the gain to maximum level, the AGC Disable function reduces the hiss when the camera is recording during quiet moments.